Club100 Member Upload Library

ipl_dos.dat

This is a binary file representing IPL for DOS which gets loaded into the M100/T102/T200. This is extracted from a boot disk.

Steve Adolph

ipl_diskbasic.dat

This is a binary file representing the IPL for disk basic which gets loaded into the M100/T102/T200. This is extracted from a boot disk.

Steve Adolph

dos.dat

This is a binary file representing DOS which gets loaded into the M100/T102 or T200. This is extracted from a boot disk.

Steve Adolph

diskbasic_200.dat

This is a binary file representing disk basic which gets loaded into the T200. This is extracted from a boot disk.

Steve Adolph

diskbasic_100.dat

This is a binary file representing disk basic which gets loaded into the M100/T102. This is extracted from a boot disk.

Steve Adolph

disk map.xls

This is an excel spreadsheet that summarizes the structure of the boot disk, the contents, the sector locations and the size of the files. It's been a while since I looked at this. It appears that the IPL for disk basic is able to discern which machine it is being loaded into. DOS gets loaded into the DVI. Disk BASIC gets loaded into the target machine. These files were extracted from a boot disk that supported both the M100/T102 and the T200. Early versions of DVI only supported M100 as T102/T200 did not exist yet.

Steve Adolph

Model 100 DVI drive1.txt

file discussing adding a second drive

Steve Adolph

Model 100 DVI drive.txt

file discussing adding a second drive

Steve Adolph

DVI.TD0

Teledisk boot disk image, good for M100/T102 and T200.

Steve Adolph

DVI.DAT

This is an image of a complete DVI boot disk. It is organized as sector data as read from the disk.

Steve Adolph